- Beschreibung
Produkt aus dem Angebot zurückgezogen
Der Gerätester PAT-815 wird zur Sicherheitsüberprüfung an elektrischen Geräten (Elektrowerkzeugen, Weißer Ware, etc.) verwendet. Es werden gemssen: Schutzleiterwiderstand, Isolationswiderstand, Durchgängigkeit von Verbindungen, Leckströme, Leistung, automatische Messung aller RCD Parameter.
Der PAT-815 kann zur Messung gemäß folgender Normen verwendet werden:
- EN 60745-1 Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 1: Allgemeine Anforderungen
- EN 61029 Sicherheit transportabler motorbetriebener Elektrowerkzeuge - Allgemeine Anforderungen
- EN 60335-1 Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 1: Allgemeine Anforderungen
- EN 60950 Sicherheitsaspekte für xDSL-Signale in Stromkreisen für den Anschluss an Telekommunikationsnetze
- AS/NZS 3760:2010 In-service safety inspection and testing of electrical equipment
- VDE 0404-1 Prüf - und Messeinrichtungen zum Prüfen der elektrischen Sicherheit von elektrischen Geräten. Teil 1: Allgemeine Anforderungen
- VDE 0404-2 Prüf - und Messeinrichtungen zum Prüfen der elektrischen Sicherheit von elektrischen Geräten. Teil 2: Prüfeinrichtungen für Prüfungen nach Instandsetzung, Änderung oder für Wiederholungsprüfungen
- VDE 0701-0702 Prüfung nach Instandsetzung, Änderung elektrischer Geräte. Wiederholungsprüfung elektrischer Geräte. Allgemeine Anforderungen für die elektrische Sicherheit
- Technische Daten
Common features of the instruments:
- measurement of protective conductor resistance with the currents: 200 mA, 10 A , 25 A ( protection class I),
- measurement of insulation resistance – three measurement voltages: 100 V, 250 V and 500 V,
- RCD testing,
- measurement of equivalent leakage current,
- measurement of residual leakage current,
- measurement of touch leakage current,
- measurement of power,
- measurement of current consumption,
- IEC lead test,
- measurement of mains voltage and frequency.
Other features:
- intuitive user interface,
- typing with QWERTY keyboard on the large and clear touch display,
- manual tests and auto tests, the ability to describe auto test with standards or any name,
- automatic measurement of RCD parameters,
- automatic measurement range selection,
- cooperation with a barcode reader and printer,
- support for barcode reader (including 2D), readings of the original serial numbers for the appliances and registration codes and auto test codes,
- the results can be printed (also automatically after every measurement), reports (works with the printer), two labels can be printed after a single test (for the device and a removable wire),
- build-in help with instructions how to connect test equipment and how to perform measurement,
- option to skip single measurement in the auto test, with the recording that choice of skipping of specified measurement was made conscious, the option does not apply to build-in auto tests,
- description of test equipment, measurement location, customer data, assigning the serial number of the device under test and the index can be stored in meter memory, ability to write notes about the device under the test
- base of the appliances, customers, description of the equipment and damage.
- ability to create many user accounts with log-in function (as an option),
- supports USB flash drive;
- communication with PC via USB,
- works with the program Sonel Reader and Sonel PAT (option); measurement and settings configuration from the meter and also from PC, data analysis.
- professional software for data processing and reporting.
Measurement of protective earth conductor resistance I=200mA (protection class I)
Display range Resolution Accuracy 0,00...0,99 Ω ±(4% m.v. + 2 digits) 1,00...19,99 Ω 0,01 Ω ±(4% m.v. + 3 digits) - test current: ≥200 mA for R = 0,2 Ω …1,99 Ω
- adjustable measurement time: 1 s…60 s with1 s resolution
- adjustable limit
Measurement of protective earth conductor resistance I=10A (protection class I)
Display range Resolution Accuracy 0...999 mΩ 1 mΩ ±(3% m.v. + 4 digits) 1,00...1,99 Ω 0,01 Ω ±(3% m.v. + 4 digits) - test current: ≥ 10 A for R ≤ 0,5 Ω
- adjustable measurement time: 1 s…60 s with1 s resolution
- technical method
- adjustable limit
Measurement of protective earth conductor resistance I=25A (protection class I)
Display range Resolution Accuracy 0...999 mΩ 1 mΩ ±(3% m.v. + 4 digits) 1,00...1,99 Ω 0,01 Ω ±(3% m.v. + 4 digits) - test current: ≥ 25 A for R ≤ 0,2 Ω
- adjustable measurement time: 1 s…60 s with1 s resolution
- adjustable limit
Measurement of insulation resistance
Measurement range according to IEC 61557-2 for:- UN=100 V: 100 kΩ...99,9 MΩ
- UN=250 V: 250 kΩ...199,9 MΩ
- UN=500 V: 500 kΩ...599,9 MΩ
UN Display range Resolution Accuracy 100V 0...1999 kΩ 1 kΩ ±(5% m.v. + 8 digits) 100V 2,0...19,99 MΩ 0,01 MΩ ±(5% m.v. + 8 digits) 100V 20,0...99,9 MΩ 0,1 MΩ ±(5% m.v. + 8 digits) 250V 0...1999 kΩ 1 kΩ ±(5% m.v. + 8 digits) 250V 2,00...19,99 MΩ 0,01 MΩ ±(5% m.v. + 8 digits) 250V 20,0...199,9 MΩ 0,1 MΩ ±(5% m.v. + 8 digits) 500 V 0...1999 kΩ 1 kΩ ±(5% m.v. + 8 digits) 500 V 2...19,99 MΩ 0,01MΩ ±(5% m.v. + 8 digits) 500 V 20,0...599,9 MΩ 0,1 MΩ ±(5% m.v. + 8 digits) - nominal current: min 1 mA…1,4 mA
- adjustable limit
- adjustable measurement time: 3 s…3 min with 1 s resolution
- automatic discharge of the capacity of the tested device after measurement
- protection against measuring live devices
Measurement of PE and residual leakage current:
Display range Resolution Accuracy 0,00...3,99 mA 0,01 mA ±(5% m.v. + 2 digits) 4,0...19,9 mA 0,1 mA ±(5% m.v. + 2 digits) - adjustable limit
- adjustable measurement time:1...60s with1s resolution
Measurement of equivalent leakage current:
Display range Resolution Accuracy 0,00...3,99 mA 0,01 mA ±(5% m.v. + 2 digits) 4,0...19,9 mA 0,1mA ±(5% m.v. + 2 digits) - open circuit voltage 25...50 V
- adjustable limit
- adjustable measurement time:1...60s with1s resolution
Measurement of touch leakage current:
Display range Resolution Accuracy 0,00...4,999 mA 0,001 mA ±(5% m.v. + 3 digits) - adjustable limit
- adjustable measurement time:1...60s with1s resolution
Measurement of power S:
Display range Resolution Accuracy 0...999 VA 1 VA ±(5% m.v. + 3 digits) ±(8 % m.v. + 5 digits)* 1...3,99 kVA 0,01 kVA ±(5% m.v. + 3 digits) ±(8 % m.v. + 5 digits)* - adjustable measurement time:1...60s with1s resolution
- * - for measurement with clamps
Measurement of power P:
Display range Resolution Accuracy 0...999 W 1 W ±(5% m.v. + 3 digits) ±(8 % m.v. + 5 digits)* 1...3,99 kW 0,01 kW ±(5% m.v. + 3 digits) ±(8 % m.v. + 5 digits)* - adjustable measurement time:1...60s with1s resolution
- * - for measurement with clamps
Power factor PF:
Display range Resolution Accuracy 0,00...1,00 0,01 ±(10% m.v. + 5 digits) - adjustable measurement time:1...60s with1s resolution
Measurement of current consumption:
Display range Resolution Accuracy 0,00...15,99 A 0,01 A ±(2% m.v. + 3 digits) - adjustable measurement time:1...60s with1s resolution
Voltage measurement:
Display range Resolution Accuracy 195,0…265,0 V 0,1V ±(2% m.v. + 2 digits) Frequency measurement:
Display range Resolution Accuracy 45,0 Hz...55,0 Hz 0,1 Hz ±(2% m.v. + 2 digits) Pomiar napięcia PE sieci:
Display range Resolution Accuracy* 0,0...59,9 V 0,1 V ±(2% m.v. + 2 digits) - * - for U < 5 V accuracy is not specified
Measurements of RCD parameters
RCD trigger and response time test tA
Test range according to IEC 61557: 0 ms ... to the upper limit of displayed valueRCD type Factor Range Resolution Accuracy General 0,5*IΔn 0...300 ms 1 ms ± (2% m.v. + 2 digits) (for RCD of IΔn=10 mA and the measurement with 0,5xIΔn accuracy is: ±(2% m.v.+ 3 digits) General 1*IΔn 0...300 ms 1 ms ± (2% m.v. + 2 digits) (for RCD of IΔn=10 mA and the measurement with 0,5xIΔn accuracy is: ±(2% m.v.+ 3 digits) General 2*IΔn 0...150 ms 1 ms ± (2% m.v. + 2 digits) (for RCD of IΔn=10 mA and the measurement with 0,5xIΔn accuracy is: ±(2% m.v.+ 3 digits) General 5*IΔn 0...40 ms 1 ms ± (2% m.v. + 2 digits) (for RCD of IΔn=10 mA and the measurement with 0,5xIΔn accuracy is: ±(2% m.v.+ 3 digits) Measurement of RCD disconnection current IA for sinusoidal differential current
Test range according to IEC 61557: (0,3...1,0)IΔnSelected nominal current of RCD Range Resolution Test current Basic uncertainty 10 mA 3,3...10,0 mA 0,1 mA 0,3 x IΔ..1,0 x IΔ ± 5%IΔn 15 mA 4,5...15,0 mA 0,1 mA 0,3 x IΔ..1,0 x IΔ ± 5%IΔn 30 mA 9,0...30,0 mA 0,1 mA 0,3 x IΔ..1,0 x IΔ ± 5%IΔn - it is possible to start the measurement from the positive of the negative half of forced leakage current
- test current passage time max. 3200 ms
- automatic measurement of RCD disconnection time (tA) and disconnection current
- measurement for: 0,5IΔn, 1IΔn, 2IΔn i 5IΔn,
Electrical safety:
- measurement category: II 300V acc.to EN 61010-1
- enclosure protection rating acc. to EN 60529: IP40 (IP67 with lid closed)
Other technical specification:
- power supply: 195 V...265V, 50Hz
- load current: max. 16A (230V)
- data transmission to PC: USB 2.0, WiFi
- dimensions: 330 x 235 x 120 mm
- weight: approx. 6,2 kg
- operating temperature: -10°...+50°C
- storage temperature: -20°...+70°C
- humidity:20...80%
- display: TFT 7'’ 800x480
- Standardzubehör
- Optionales Zubehör
- Dateien
- Sonel Reader (aktuelle Version)Veränderungen
Änderungen in Version 4.0.16.0 gegenüber der Vorgängerversion:
- Verbesserte Anzeige der PI- und DAR-Faktoren.
- Firmware PAT-815Veränderungen
Änderungen in Version 1.16 gegenüber der Vorgängerversion:
- Verbesserte Rpe 200mA IEC-Messung.
- Die korrekten Versionen der automatischen Verfahren für PAT-820L-Messgeräte wurden hochgeladen.
Kontakt
Kundenservice+48 74 884 10 53
Verkaufsabteilung+48 74 85 83 860
Häufig gestellte Fragen (FAQ)
Sprache
Menü